$2.00 - $2.33 $9.90 - $10.99 Up To 82% Savings
- Service parts for Torsion-SX8 and Jive models - Rebuild kits include four Sealed bearings, two DU bushings and all Small parts
$3.80 $21.90 83% Savings
- Service parts for Torsion-SX8 and Jive models - Rebuild kits include four Sealed bearings, two DU bushings and all small parts
$4.01 $10.00 60% Savings
- Heat treated chromoly replacement traction pins for Holzfeller platform pedals
- Protects cranks from damage caused by overtightening pedals - Can be used for bike fit adjustments, Dependent on pedal thread length engagement
Dimension Hardware for attaching toe clips and straps to pedals. Includes four nuts and four bolts.
Designed to work with Odyssey JC/PC pedals.
$8.00 $19.90 60% Savings
- Replacement wearplate sets include 2 right and 2 left plates, enough for one set of pedals - Service parts for 1st generation LG1 pedals only
Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe. - Kit includes eight 1mm traction pads and eight 2mm traction pads
Dimension Nylon Toe Clips. Included instructions account for toe strap installation, but straps must be purchased separately -Toe straps are NOT included -Sold as a pair
• Plastic nylon molded body • Chromoly spindle • 318g pair
• City/road half clips • With reflectors • No straps needed • Resin
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.
Coffee Shop Caps keep dirt and mud out of your Zero series cleats when you're off the bike, and give you traction when walking on uncarpeted surfaces. Made of high-traction molded polymer.
Dimension Nylon Basic Toe Straps -Durable metal buckle -Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel)
• Nylon clips • Woven straps • For ATB or hybrid use
• One-piece ABS resin body • Molded pins • 320g pair
• One-piece resin body • Juvenile size platform • Boron spindle • 390g pair
• One-piece nylon body • Chromoly spindle • Toe clip compatible • 407g pair
- Fits most platform pedals - Two wooden riser blocks w/durable rubber band - Adds 3/4" to each side (1-1/2" total)
• Great for spinning • Heavy-duty buckle
Dimension Mini Toe Clips - Toe clips do not accept toe straps - Sold as a pair - Mounting hardware for the toe-clip is included
Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - 440mm length
$11.99 - $21.99
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)
• One-piece resin body • Chromoly spindle • Toe clip compatible • 366g pair • 1/2-inch spindle
Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action. - 2pcs IGUS self lubricating bushing - 2pcs O-ring - 2pcs stainless shim washer
$13.99 - $15.99
• Galvanized steel pedal body • 2-piece block platform • Boron axle • Plastic blocks w/ integrated reflector • 553g pair
Page 1 of 12 Next page